LocationCall :  9935837444                jshtech@jshtech.in 

 16 Channel Analog Input Module

Item No:
S830-16C00CV01G16GIND
16 Channel Analog Input Module

Detailed view of Saksham AI16 PLC module by TPW Industries
Thumbnail of Saksham AI16 PLC module by TPW Industries
Thumbnail of Saksham AI16 PLC module by TPW Industries Thumbnail of Saksham AI16 PLC module by TPW Industries

Item No:
S830-16C00CV01G16GIND
16 Channel Analog Output Module

No. of Analog Inputs
16 Channels
Type Of Analog Input
0/4-20 mA 
Hardware Functional Status
From July 22
Firmware Version
1.00.001
Firmware Update Possible
Yes
Engineering Software
CODESYS V3.5 SP19 and above
Mounting
Base Unit TBUS-PPPPPPPP
Galvanic Isolation
Yes
Galvanic Isolation Group
01 Group
Channels In Group
16 Channel/groups
Input Short Circuit Protection
Yes, For Each Channels
Input Over-Current Protection
Yes (40 mA)
Power Supply From 
Top Side De-Coded Plug-In Screw Terminal
Normal Supply Voltage
24 V DC
Low Supply Voltage
21.6 V DC
High Sypply Voltage
26.5
Reverse Polarity Protection
Yes
Input Current
0.5 AMP
Input Current Per Channel (Permissible)
25 mA
Transmitter Power
Yes
Power Loss
Less than 1 W
Input Range
0-20 mA
Input Range
4-20 mA
Mesasurning Range
Scalable
Input Resistance
120 Ω
Parameterization in Run
Yes
Calibration in Run
Yes
Automatic Encoding 
No
Mechanical Coding Element
Yes
Analog Input Measuring Principal
Sigma Delta (Integrating)
Resolution (With Over Range Max)
12 Bit
Conversion Time Per Channel
100 Ms
Linearity Error  
0.1% (Input Range)
Operational Error 
0.5% (Input Range)
Basic Errer 
0.3% (Input Range)
Series Mode Interference
Min 70 dB
Common Mode Voltage
Max 10 V
Common Mode Interference
90 dB
Diagnostic Alarm
Yes
Limit Alarm
Yes
Function Of Diagnostics
Available
Wire-Break 
Yes (4-20 mA)
Short-Circuit  
Yes
Channel Diagnostics
Yes
Power Indication
Yes
Channel Status
No
Channel Diagnostics (Wire Break Joint)  
No
Module Diagnostics (Back-Plane Comm) 
Yes
Seperation Between Channel  
No
Seperation Between Backplane  
Yes
Seperation Between Channel And System Power Supply  
Yes
Insulation Tested With  
500 V DC
Horizontal Installation  
0°C
Horizontal Installation  
60°C
Vertical Installation  
0°C
Vertical Installation 
60°C
Field Connection  
37-Pin D-Sub Female Connector
Power Connection 
5 Pin Phoenix Plug-In Screw Connector (De-Coded)
Cable Length Max.  
500 m, 1.0 mm² shielded cable
Address Space Per Module 
32 Bytes
Dimensions (W x H x D)  
25 x 122 x 115 mm
Weight  
160g Approx

The analog input module is a crucial component designed to facilitate the integration of analog signals into the PLC System. It receives analog signals from a diverse array of external devices including sensors, transmitters, variable frequency drives etc. Through these inputs we are able to optimally control and monitor the vital processes within the plant environment, this product is a 16-channels analog input module designed with galvanic isolation of 16 channels in a group.

 
 
© All Rights Reserved By TPW-SAKSHAM